2.0 MP 1080P 4-IN-1 SECURITY CAMERA】-- - This 4-in-1 TVI/CVI/AHD/CVBS Dome
Camera. compatible with HD-TVI, AHD, CVI, and CVBS/960H analog DVRs. High
performance lens captures everything in great detail and presents true-to-life
color on screen.
65FT NIGHT VISION】-- - Built in 24pcs IR LEDs, IR 65ft/20m night vision ,
Megapixel 3.6mm lens with IR CUT provide clear images, even in the dark.
INDOOR AND OUTDOOR USE 】--- Aluminum Metal vandal proof & waterproof can
withstand the toughest of outdoor conditions,3-Axis Camera Stand, cable through
4 MODE VIDEO OUTPUT】-- - 1080P AHD, 1080P CVI, 1080P TVI and CVBS .Default
Video mode is 960H mode, compatible with all analog DVRs. 1080P video mode must
be switched according to your DVR type. Widely Usage: With OSD button, you can
change signal mode freely and quickly in 5 seconds.
This 4-in-1 professional bullet security camera built-in 1/2.7" CMOS Image
Sensor, with 2.0
Megapixel Resolution and an advanced circuit design, it adopts an advanced
The camera resolution is as high as 1080p Full HD, which ensures clear and
This 1080P HD camera has a built-in OSD menu that can change the 4 different
video outputs HD-TVI, AHD, CVI, and CVBS (960H) and adjust the video settings.
Switch from AHD: Press Leftward for 5 Seconds
Switch from TVI: Press Rightward for 5 Seconds
Switch from CVBS: Press Upward for 5 Seconds
Switch from CVI: Press Downward for 5 Seconds
This 4-in1 camera is fully compatible for the following HD DVRS:
Hikvision, Dahua, GW, LTS, Q-see, Swann, Samsung, Night Owl, Best Vision, HD
HQ-CAM, Annke, Aposonic, I-DVR Pro, Vonnic, Digital Watchdog, Logisaf, Sannce,
Venetech, Speco, Alibi, KT&C, Cantek, ZOSI and many more.
Q: Video Loss appears where the image from my camera should be displaying on
A: 1. Check the extension cable (power and video) is securely connected to the
2.Check the video output from the camera is securely connected to a video
input channel on the DVR.
3.Check the power from the camera is securely connected to a power supply.
4. The camera mode do not match your DVR. There is 2 ways to setup.
1) Press OSD Joystick “DOWN” 5 seconds, if still no picture come, try to
press “LEFT” “RIGHT””
UP” for 5 second, till the signal matching your DVR.
2) Make sure the signal of your DVR, Use OSD Joystick to change the mode of
according to your DVRs video Mode.